Portable Mini 12V 24V DC Electric Submersible Pump For Pumping Diesel Oil Water Aluminum Alloy Shell 12L/min Fuel Transfer Pump

Are you still carrying buckets to fill up diesel fuel for Cars or large machinery❓Dangerous and wasteful‼

Please use a portable submersible oil pump with stable performance and fully sealed insulation.

Description
✓ Lightweight, easy to install and carry.
✓ The electric cable is 3 meters long and the diameter of the pump mouth is 16 mm.
✓ Suitable for large harvesters, agricultural machinery, construction machinery, large wheel tractors and other field operations refueling inconvenient transportation and equipment and machinery that can not reach the gas station refueling.

MAIN FEATURES

Applicable to: Diesel water

1. Using DC12V direct current motor, low noise, fast speed. It has good sealing performance and adopts multiple seals to prevent leakage and prolong service life.

2. Stainless steel shell increases the thickness of the shell, which makes the shell stronger and not easy to deform, and can effectively prevent the shell from rusting and rotting.

3. The bottom filter of the oil well pump is equipped with a stainless steel filter inside, which makes the pumped diesel oil (or water) cleaner. The bottom filter is equipped with a threaded interface, which is easy to disassemble, maintain and replace. Reuse can be achieved.

Usage：
When pumping oil, you should first connect the self-contained oil discharge hose, and then put the whole well into clean oil (or water).

There is an intermediate switch on the power line for easy operation. The oil output is about 12 L/min. The oil (or water) should be taken out promptly after the oil well pump is used.

Notice
1, this pumping pump is strictly prohibited to pump gasoline, alcohol and other flammable body! Can not be no-load operation and dry pumping.

2, the pump should work intermittently (i.e., each use of no more than 20 minutes, stop 10-15 minutes before continuing to use), note that it can not work continuously for a long time.

3, confirm the use of power supply voltage and oil pump marked voltage is consistent, voltage tolerance ± 5%, pay attention to the positive and negative poles.
Withstand temperature: room temperature within 50 ℃